Do You Have Any Questions?
Leave us a message and we will get back to you within 24 hours.
Non Bituminous Polymer Self Adhesive Waterproofing Membrane （100% Asphalt-Free） Non asphalt based polymer self adhesive membrane waterproofing membrane is a new type of waterproofing material widely used in waterproofing engineering design. Width: 1.5–2 m, Thickness: 1.2 mm / 1.5 mm / 1.8 mm / 2.0 mm. The membrane is composed of a polymer substrate laminated…
EPDM rubber Waterproofing roll on Membrane EPDM waterproofing membrane is a highly elastic synthetic polymer waterproofing sheet manufactured using internationally advanced cold-feed extrusion continuous vulcanization technology. It is produced with EPDM rubber from DuPont (USA) and high-quality domestic raw materials, combined with carbon black reinforcing agents, nano-modifiers, plasticizers, vulcanization accelerators, and other processing aids. The…
Cross-Laminated HDPE Self-Adhesive Waterproofing Membrane Self-adhesive waterproofing membrane is made of a homogeneous polymer sheet as the main material, with a self-adhesive compound coated on the surface. It is suitable for bonding with freshly poured concrete or cement mortar.After reacting and solidifying with liquid concrete, it forms a gapless bond between the waterproofing layer and the concrete structure, eliminating the risk of water migration between layers and effectively improving the reliability of the waterproofing…
Pre-applied & Wet-applied HDPE Waterproofing Membrane pre-applied waterproofing membrane Product Overview Pre-applied PY type (polyester mat): The wide-width self-adhesive pre-applied polyester mat waterproofing membrane is made of bitumen-based polyester mat membrane as the main material (with functional additives), coated with a self-adhesive layer on both sides, and provided with a removable silicone-coated film as the…
APP Modified Bitumen Plastomeric Waterproofing Sheets Membrane APP (atactic polypropylene) plastic modified asphalt waterproofing membrane uses APP or polyolefin polymers (APAO, APO) modified bitumen as the coating and impregnating material. The carrier can be a high-quality polyester mat, fiberglass mat, or composite mat. The upper surface is finished with release materials such as PE film,…
Self-adhered Polymer modified bituminous waterproofing sheet membrane Self-adhesive polymer-modified asphalt waterproofing membrane (hereinafter referred to as Type N) is made of synthetic rubber such as SBS, high-quality paving bitumen, and tackifiers as the base material. The upper surface material is PET film, PE film, aluminum foil, or silicone release film, and the lower surface is…
SBS Modified Bitumen Elastomeric Waterproofing roll on Membrane SBS Modified Bitumen Waterproofing Membrane is made using SBS (styrene-butadiene-styrene) thermoplastic elastomer-modified asphalt as the coating material. The carrier can be high-quality polyester mat, fiberglass mat, or glass-reinforced polyester mat. The surfacing materials include fine sand, mineral granules, PE film, and aluminum film. The membrane is produced…
Most existing concrete roofs can be repaired with a suitable waterproofing system. Whether the roof is aging or needs to be extended, choosing the right waterproofing solution and performing the work correctly are crucial.
Modified Bituminous Membrane Roofing is essentially a “super-thick, rubber/plastic-infused waterproof tarp” designed for flat or low-slope roofs. Built on an asphalt base modified with high-polymer materials, it is created by blending plastic or putty-like polymers into asphalt and sandwiching a reinforcing layer of thick fabric or fiberglass mesh within. This process transforms it into a…
End of content
End of content
ALL YOUR IDEAS CAN BE REALIZED HERE!
Watsapp:+8613792181135
Email：[email protected]
Email：[email protected]
Phone：+8613792181135
© Copyright 2025 WEI FANG HUAYU WATERPROOF MATERIAL CO.,LTD All right reserved.
